Skip to content
Baltic Dry1,942+1.84% SCFI1,388.6-2.10% WCI 40ft$2,214-1.35% Brent$74.18+0.62% VLSFO SG$548.5+0.40% Harpex2,2310.00% USD/BRL5.412-0.28% EUR/USD1.0864+0.11%
Wednesday
November 18, 2026
The Port Journal

Searenergy to Carry Out Hook-Up and Commissioning of Bałtyk 2 & 3 Offshore Substations

The joint venture between Equinor and Polenergia has awarded Searenergy Poland a contract for hook-up and commissioning (HUC) work on the...

1 min read
Searenergy to Carry Out Hook-Up and Commissioning of Bałtyk 2 & 3 Offshore Substations
Photo: offshoreWIND.biz

The joint venture between Equinor and Polenergia has awarded Searenergy Poland a contract for hook-up and commissioning (HUC) work on the offshore substations at the 1.44 GW Bałtyk 2 and Bałtyk 3 offshore wind farms, and for commissioning support for the 100 wind turbines that the two wind farms will comprise.

The company will supply key commissioning personnel for onshore and offshore activities, alongside engineering, health, safety and environmental (HSE) services and on-site procurement support.

Searenergy will also carry out corrective maintenance on transition pieces (TPs) from the developers’ operations and maintenance (O&M) base in Łeba, preparing the components for wind turbine installation.

Bałtyk 2 and Bałtyk 3 are being built in the Polish Baltic Sea, approximately 37 kilometres and 22 kilometres off the coast, respectively. Each project has a planned capacity of 720 MW and will feature 50 Siemens Gamesa SG 14-236 DD wind turbines, each rated at 14.4 MW.

This story was originally published by offshoreWIND.biz. Read the full story at offshoreWIND.biz →

Conversation

Comments are moderated before publication.

More in Offshore & Energy

View all
BACK TO TOP ▲