Skip to content
Baltic Dry1,942+1.84% SCFI1,388.6-2.10% WCI 40ft$2,214-1.35% Brent$74.18+0.62% VLSFO SG$548.5+0.40% Harpex2,2310.00% USD/BRL5.412-0.28% EUR/USD1.0864+0.11%
Thursday
November 19, 2026
The Port Journal

Access Equipment for Stock & Racking Checks

Warehouse teams that count stock, inspect racking or service lights at height often start with the wrong question: how high do we need to go? Working height matters, but aisle width, floor loading, reach,…

1 min read
Access Equipment for Stock & Racking Checks
Photo: Logistics Business

Warehouse teams that count stock, inspect racking or service lights at height often start with the wrong question: how high do we need to go? Working height matters, but aisle width, floor loading, reach, charging and training usually decide which machine is safe and productive.

This guide, by Coman Lifting, compares three common choices for indoor logistics work: electric scissor lifts, vertical mast lifts, and order pickers. It is for warehouse and facilities managers, not a product pitch.

Before you hire or buy, walk the bay with a tape measure. Note the highest task, the narrowest aisle the machine must enter, door and mezzanine limits, floor type and any published floor-load limit, what people will carry on the platform, and how long the machine must last between charges. Those numbers filter out most unsuitable kit quickly.

Electric scissors suit stock counts and racking inspection when the work is mainly straight up and the aisle is wide enough for the platform. The deck is usually larger than a mast or picker basket, which helps when two people share a count or when tools ride along.

This story was originally published by Logistics Business. Read the full story at Logistics Business →

Conversation

Comments are moderated before publication.

More in Logistics

View all
BACK TO TOP ▲