Skip to content
Baltic Dry1,942+1.84% SCFI1,388.6-2.10% WCI 40ft$2,214-1.35% Brent$74.18+0.62% VLSFO SG$548.5+0.40% Harpex2,2310.00% USD/BRL5.412-0.28% EUR/USD1.0864+0.11%
Thursday
November 19, 2026
The Port Journal

CN Heavy deploys Scheuerle STB 260

Norwegian haulage specialist CN Heavy Transport has taken delivery of a Scheuerle STB 260, immediately deploying the side girder bridge on two demanding transformer transports. The transformers were built by Italian manufacturer Tamini and…

1 min read
CN Heavy deploys Scheuerle STB 260
Photo: Project Cargo Journal

Norwegian haulage specialist CN Heavy Transport has taken delivery of a Scheuerle STB 260, immediately deploying the side girder bridge on two demanding transformer transports.

The transformers were built by Italian manufacturer Tamini and transported from Italy to Norway via road and sea. CN Heavy was responsible for the final leg of the journey – a 70 km road haul from the port of Bogen to Bjørnfjell.

The transformers weighed 128 and 185 tonnes respectively, The heavier unit measured approximately 9 m in length, 3.2 m in width and 4. 65 m in height. Combined with the side girder bridge, trailer units and prime movers, the complete transport combination had a gross vehicle weight of 386 tonnes and an overall length of 71.5 m.

Ole Kristian Ruud, project manager at CN Heavy, said the STB more than proved its worth, having journeyed from sea level to an altitude of around 500 m covering gradients of up to 10 percent, as well as negotiating traffic islands and extremely tight tunnel clearances.

This story was originally published by Project Cargo Journal. Read the full story at Project Cargo Journal →

Conversation

Comments are moderated before publication.

More in Logistics

View all
BACK TO TOP ▲