FAA orders repeated safety checks on selected Boeing 737NG aircraft
The US Federal Aviation Administration (FAA) has ordered repeated flight-control system tests on selected Boeing 737 Next Generation (737NG) aircraft after identifying a potential fault in a safety monitor linked to the autothrottle system.
The issue concerns the cruise thrust split monitor, known as MONFD, which is designed to disconnect the autothrottle when it detects an excessive difference in thrust between the aircraft’s two engines.
The monitor uses flight-control information, including spoiler-position data, to identify conditions associated with asymmetric engine thrust. If one engine produces significantly more thrust than the other, the aircraft can experience yaw and roll. The autopilot may initially counter these forces using the ailerons and flight spoilers.
However, the FAA identified the possibility of missing or incorrect spoiler-position data. If the monitor receives faulty information, it may fail to activate when required. This could allow the autothrottle to remain engaged despite a significant thrust imbalance, potentially resulting in an uncommanded roll and, if not corrected by the flight crew, loss of control.
The directive, AD 2026-23-04, requires repetitive aileron built-in test equipment (BITE) checks of the digital flight-control system. The tests must follow Boeing Alert Safety Advisory 737-BSA-22-001, dated 30 October 2026.
This story was originally published by CargoTalk. Read the full story at CargoTalk →




Conversation